Accessories

Anti-Climb Classic & Platinum Coupler Wrench accessory available only for the Anti-Climb Classic & Platinum panels.

The Anti-Climb Classic & Platinum Panel Coupler is the essential connector for secure, continuous perimeter runs. Available for purchase, ideal for construction, demolition, and event sites using the Classic or Platinum line.

The Anti-Climb Classic & Platinum Panel Tube Stand keeps anti-climb perimeter panels upright and stable for fast installation. Available for purchase, it is a wide steel base designed to hold fence panels upright and square, supporting a stable, continuous perimeter across large sites.

The Anti-Climb Classic & Platinum Panel Wheel Kit converts a standard fence panel into a rolling gate, giving sites controlled vehicle and equipment access wherever it is needed along the perimeter.

The Anti-Climb Classic & Platinum Pedestrian Gate provides a defined, lockable foot-traffic access point within an anti-climb fence line, supporting controlled entry onto active construction sites. Available for purchase, ideal for construction, demolition, and event sites requiring controlled pedestrian access.

The Anti-Climb Lockable Coupler is the trusted anti-tamper upgrade with griplock protection against theft. Available for purchase, helping prevent sections of a fence line from being unclipped and removed.

The Anti-Lift Bracket is fence panel security hardware designed to help prevent panels being lifted out of their bases, closing a common access route through an otherwise secure fence line. Available for purchase, ideal for high-value construction sites and unattended overnight or weekend jobs.

The Barbed Wire Extension is an attachment point that adds a barbed wire line above an Anti-Climb fence panel. Available for purchase, it is ideal for data centers, high-theft-risk construction sites, and secure compounds.

The Barbed Wire Extension adds a Y-shaped, anti-climb security topper to fence panels. Available for purchase, ideal for data centers and other high-security construction sites.

Broadblock is the ground-penetration-free stabilizing solution for fence lines on paved or hard surfaces. Available for purchase, ideal for urban construction and event sites on pavement or concrete.

BroadFoot is a 33 lb recyclable plastic temporary fence foot weight. It is the no-mess, no-sandbags alternative for stabilizing anti-climb fence panels with a pedestrian-safe design. Available for purchase, ideal for construction sites and events prioritizing fast, clean installation.

The Containment J Hook adds a further layer of tamper-resistant containment hardware to Anti-Climb fence lines. Available for purchase, ideal for data centres, high-security construction sites, and secure material compounds.

Accessory available only for the Anticlimb panels.

The Double Sliding Gate Kit turns two standard 6ft or 8ft panels into a double sliding vehicle gate. Available for purchase, ideal for construction sites, civil works, and events needing vehicle-width entry points.

The Earth Anchor is a low-cost pre-galvanized stake that secures fence panels directly to the ground in soft soil. Available for purchase, ideal for soft-ground construction sites, landscaping jobs, and rural or open-field event perimeters.

The Heavy-Duty Sandbag is a durable, UV-resistant ballast solution for long project durations. Available for purchase, the Heavy-Duty Sandbag is a UV-resistant temporary fence sandbag designed to provide flexible ballast for fence panels, screening, signage, and barricades across changing site conditions.

The Lockable Coupler Socket is the dedicated drive tool for Broadfence's Anti-Climb Lockable Coupler hardware. Available for purchase, ideal for install crews on high-security construction sites and data centre builds.

Ox-Stand is the lightweight support option for easy transport. It is a lightweight temporary fence stand designed for easy transport by one person, positioning, and relocation as site layouts change.Available for purchase, ideal for shorter-duration construction projects and lower-wind event sites.

The Product Lifting Handle gives crews a secure, ergonomic grip for lifting and carrying fence panels. Available for purchase, ideal for construction sites, event builds, and rental yards handling high panel volumes.

The Reflective Fence Panel Strip in orange and white adds work-zone-standard high-visibility striping to a fence run. Available for purchase, ideal for road and civil works, traffic management, and utility projects.

The Reflective Fence Panel Strip in red and white adds durable, UV-printed high-visibility striping to a fence run. Available for purchase, ideal for construction sites, urban builds, and event perimeters needing pedestrian and traffic visibility.

The Single Sliding Gate Kit converts any standard 6ft or 8ft panel into a sliding entry point using panels you already own. Available for purchase, ideal for construction sites, demolition projects, and events needing single-point entry.

The Skid of Broadblock is the bulk-order option for ground-penetration-free fence stabilization, priced and freighted by the skid. Available for purchase, ideal for contractors, rental fleets, and civil works teams managing multiple construction sites.

The Skid of BroadFoot is the bulk-order format for BroadFoot fence weights, a no-sand, no-mess alternative to sandbags. Available for purchase, ideal for contractors, rental fleets, and civil works teams managing multiple construction sites.

The Standard Fence Stabilizer is an economical solution for adding wind resistance to a fence line, connecting through the existing panel coupler. Available for purchase, ideal for construction sites, civil works, and event perimeters on penetrable ground.

The Standard Stabilizer is a ground-anchored bracket adding wind support to Anti-Climb Classic and Platinum fence lines. Available for purchase, ideal for windy construction sites, civil works, and long exposed fence runs.

The Standard Stabilizer Pin Heavy Duty is the ground-anchoring hardware that locks a stabilizer arm into penetrable ground. Available for purchase, ideal for construction sites, civil works, and event perimeters where anchoring is permitted.

The Windbreak Fence Stabilizer is a heavy-duty wind-support arm for sites where ground penetration is not possible or permitted. Available for purchase, ideal for urban construction, paved sites, and event perimeters where anchoring is not an option.

The Windbreak Stabilizer Tray is the ballast component that completes a no-ground-penetration Windbreak stabilizer setup. Available for purchase, ideal for urban construction, paved sites, and event perimeters on drive-restricted surfaces.

The Windbreaker Bottom Tube is the structural cross-member that ties a Windbreaker stabilizer assembly into a rigid brace. Available for purchase, ideal for high-wind construction sites, exposed civil works, and long fence runs.

The Windbreaker Cinder Block Tray holds cinder block ballast to weight a stabilizer down where ground penetration is not possible. Available for purchase, ideal for paved urban construction sites, decks, and drive-restricted event perimeters.

The Windbreaker Elite Stabilizer is the largest-footprint stabilizer in the Broadfence range, built for maximum wind resistance. Available for purchase, ideal for high-wind construction sites, exposed civil works, and screened fence runs.

The Windbreaker Zero-Trip Foot is the compact ground-contact component of the low-profile Zero-Trip stabilizer system. Available for purchase, ideal for urban construction sites, sidewalk-adjacent work, and pedestrian foot-traffic zones.

The Windbreaker Zero-Trip Stabilizer delivers strong wind support in a low-profile design that reduces pedestrian trip hazards. Available for purchase, ideal for construction sites bordering sidewalks, urban builds, and public foot-traffic zones.

The Zero-Trip Stabilizer Base delivers fence stability in a low-profile design that removes the trip hazard of a standard protruding base. Available for purchase, ideal for urban construction, sidewalk-adjacent work, and infrastructure upgrades.

The Anti-Climb Coupler Wrench is the correctly sized hand tool for tightening and removing Broadfence anti-climb panel couplers. Available for purchase, ideal for install crews on construction, demolition, and event sites.

The Anti-Climb Premium Panel Coupler is the purpose-built connector for the Premium panel line, not interchangeable with Classic or Platinum hardware. Available for purchase, ideal for construction, demolition, and event sites running Anti-Climb Premium panels.

The Anti-Climb Premium Panel Thermoplastic Hi-Viz Foot is a durable, high-visibility base built for the Premium panel line. Available for purchase, ideal for urban construction, road works, and event sites using Anti-Climb Premium panels.

The Anti-Climb Premium Panel Wheel Kit converts a Premium panel into a rolling section for fast repositioning without full disassembly. Available for purchase, ideal for multi-phase construction sites and events using Anti-Climb Premium panels.

The Anti-Climb Premium Pedestrian Gate provides a matching, same-material foot-traffic access point for the Premium panel line. Available for purchase, ideal for construction, demolition, data centre builds, and event sites requiring controlled access.

The Standard Stabilizer Pin Heavy Duty is the ground-anchoring hardware that locks a stabilizer arm into penetrable ground. Available for purchase, ideal for construction sites, civil works, and event perimeters where anchoring is permitted.

BroadFoot is a 33 lb recyclable plastic temporary fence foot weight. It is the no-mess, no-sandbags alternative for stabilizing anti-climb fence panels with a pedestrian-safe design. Available for purchase, ideal for construction sites and events prioritizing fast, clean installation.

Elite Feet are a flat steel base option for the Select panel line, built to take harsher handling than standard plastic or rubber feet. Available for purchase, ideal for Canadian construction sites, civil works, and events using the Select panel system.

The Select Coupler is the lightweight fastening hardware that secures two Select Panels together. Available for purchase, ideal for Canadian construction sites and events using the Select panel system.

The Select Panel Foot is the standard, fully galvanized base for the Select panel line, kept in stock for fast dispatch. Available for purchase, ideal for standard construction sites, landscaping jobs, and event perimeters across Canada.

The Select Pedestrian Gate provides a matching foot-traffic access point for the Select panel line at 44 lbs. Available for purchase, ideal for Canadian construction sites, civil works, and event perimeters using the Select panel system.

The Select Top Clip is the top-rail connector for the Select panel line, using a round and square rod for a secure fit. Available for purchase, ideal for Canadian construction sites, civil works, and events using the Select panel system.

The Select Wheel Kit lets crews reposition Select panel sections without full disassembly of the fence line. Available for purchase, ideal for Canadian construction sites, landscaping jobs, and event grounds using the Select panel system.

Barricade Custom Covers turn standard Barricade Fence Panels into printed, branded space without compromising the barricade function. Available for purchase, ideal for festivals, sponsored events, parades, and public gatherings.

Broadfence Silt Fence is a geotextile sediment barrier that controls runoff and supports ESC compliance on active sites. Available for purchase, ideal for construction, civil engineering, and road works projects with erosion control requirements.

Custom Covers turn standard temporary fence panels into branded space while retaining the privacy and sight-line-blocking benefits of screening. Available for purchase, ideal for construction sites, urban builds, and events needing privacy plus branding.

Privacy Screening is a temporary fence privacy screen that attaches to temporary fence panels to block street-level sight lines into a job site, deterring theft and controlling dust transfer. Available for purchase, ideal for construction sites, urban builds, and demolition projects needing added visual security.