Jobsites that have not met the new requirements of the MUTCD 11th edition update by January 18, 2026, may be subject to fines of $ 16,000 or a complete site shutdown. If you manage jobsites or procure equipment and materials for jobsites, you need to be up to date and compliant with the new requirements. Failure to comply could mean failing an OSHA (Occupational Safety and Health Administration) inspection, which could lead to costly delays, fines, and project disruptions.
MUTCD’s latest update took effect on January 18, 2024, and will have real implications during your next OSHA inspection. Even though MUTCD is the standard for traffic safety, it does not replace OSHA guidance on your jobsite. However, MUTCD has a direct influence on how you design and control work zones that intersect with public roads. We took the liberty of breaking down the requirements of MUTCD for you, we took the legalese out of it, and put together a quick guide that shows you what changed, how this intersects with OSHA, and practical steps you can take to meet the new standards.
What is MUTCD, and why is it important?
According to the Department of Transportation, the Manual on Uniform Traffic Control Devices (MUTCD) sets the standards for all road signs, signals, pavement markings, barricades, and temporary traffic control devices used on public roads. This is relevant for construction and infrastructure projects because it affects the following areas:
- Work zones
- Barricades, drums, and temporary fencing purchased for the jobsite.
- ADA compliance and traffic safety
How does MUTCD affect your jobsite and your next OSHA inspection?
OSHA published its top ten cited violations for the construction industry between October 2024 and September 2025. We analyzed these violations against the MUTCD requirements, and the results were shocking. The top ten violated cited for construction in the last 365 days are directly referenced in the MUTCD 11th edition. Take a look below:
How MUTCD Compliance Intersects with OSHA’s Top 2024 Violations
1. Reflectivity and Visibility: Barricades, drums, warnings, and signs
-
- Related Top Cited OSHA Violations: 1926.501 (Fall Protection) 1910.1200 (Hazard Communication,
-
- MUTCD Compliance Requirement: Construction barricades and drums must have two orange and two white reflective bands with less than three inches of gap. Signs must meet the minimum levels for retroreflectivity, meaning reflective surfaces must be visible in dark or wet conditions. A detailed maintenance program is required by September, 2026
2. Height and Stability
-
- Related Top Cited OSHA Violations: 1926.501 (Fall Protection), 1926.1053 (Ladders), 1926.451 (Scaffolding).
-
- MUTCD Compliance Requirement: Traffic control devices (aka known as temporary fencing) must be the same in height, color, and spacing. Barricades/barriers should be between 36-48 inches high, and they should be able to withstand wind and impact. Jobsite signs on your perimeter should only show traffic information, no ads, or jokes.
3. Pedestrians and ADA Compliance
-
- Related Top Cited OSHA Violations: 1926.451 (Scaffolding) 1926.503 (Fall Protection Training)
-
- MUTCD Compliance Requirement: Pedestrian walkways should have an uninterrupted edging that is clearly visible (bottom rail or curb detectable by a cane). Barricades/fencing should be at least 36 inches wide for wheelchairs, walking aids, or any assistive devices. Always use orange or white materials so it is clearly marked for all to see.
4. Temporary Fencing and Barriers
-
- Related Top Cited OSHA Violations: 1910.147 (Control of Hazardous Energy) 1910.212 (Machine Guarding) 1910.178 (PIT Operation) 1926.501 (Fall Protection).
-
- MUTCD Compliance Requirement: Temporary fencing, which guides pedestrian and worker movement, is considered a traffic control device under MUTCD. Fences must be used in combination with water-filled or concrete barriers to avoid accidents. Keep the lines of sight clear from any disruptions and avoid blind corners. Perform regular inspections to notice any alignment misses, damage, or gaps.
All specifications listed above are from:
The Manual on Uniform Traffic Control Devices (MUTCD), 11th Edition.
Occupational Safety and Health Administration Top Cited Violations In 2024
Water-Filled Barriers
Our water-filled barriers are great for securing construction zones and meet MUTCD requirements for visibility and safety. The bright orange colour and reflective surface make it easily identifiable in all conditions, making it ideal as a traffic control device.
Four Practical Steps You Can Take to Be OSHA Ready for MUTCD
With the deadline for compliance fast approaching, here are some steps you and your crew can take to be compliant in time.
Step One – Do an audit: Review your current barricades, fences, and drums against the requirements listed above, replace any faded or non-reflective tapes, and remove any non-compliant or outdated equipment.
Step 2 – Update your Traffic plans: You will need to update your traffic control plans with the new items mentioned in the MUTCD update. Make sure to add the new spacing, accessibility, and traffic control devices requirements.
Step 3 – Train Your team: Use your regular toolbox talks to train your crew on correct flag positioning and how to correctly channel pedestrian traffic around the jobsite. Include all subcontractors in these refresher sessions.
Step 4: Buy temporary fencing and barricades from MUTCD-Compliant Suppliers: This is the time to make sure you have MUTCD suppliers and vendors to buy from. Just so you know, at Broadfence, we supply made-in-America solutions that are reliable and fully comply with MUTCD.
What happens if you are not compliant by January 18, 2026?
Failure to meet MUTCD requirements could put your site at risk of shutdown or a costly fine. Take, for instance, a contractor from Ohio was fined $9, 446 after the last MUTCD update for not having advance warning signs on his jobsite in violation of MUTCD.
- You could face steep fines, and OSHA just raised its maximum penalty due to inflation to $16 550 per violation.
- You could lose your federal funding for projects that do not comply with MUTCD .
- Not to mention the project delays, rework costs, and loss of future bids if you fail an inspection or DOT review.
Conclusion
MUTCD influences OSHA, and knowing the requirements helps you to get prepared ahead of the January 18, 2026, deadline. More importantly, understanding how the top ten OSHA violations intersect with the MUTCD requirements helps you prioritize your compliance plan. Our practical step-by-step guide on how to get compliant before the deadline means you will pass your next inspection with ease.
Lastly, if you need assistance with temporary fencing and barricades that are MUTCD compliant, Broadfence offers Made-in-America barricades and galvanized fencing systems that meet the 2026 standards.
Frequently Asked Questions about MUTCD 11th Edition
Is MUTCD federal law?
Yes. The Manual on Uniform Traffic Control Devices (MUTCD) is a federally recognized standard under Title 23 of the U.S. Code, and it is administered by the Federal Highway Administration (FHWA).
Is MUTCD compliance mandatory?
Yes. MUTCD applies to all public roads open and compliance is needed for federal funding eligibility.
What does “MUTCD compliant” mean?
This means a work zone meets the MUTCD’s specifications for how its designed, reflectivity, placement, and accessibility.
What are the consequences of not following the MUTCD?
Penalties include OSHA fines, loss of federal funding, and potential legal liability in case of a crash or injury.
Do states have to follow MUTCD?
Yes. Every state must adopt the 11th Edition or a conforming state manual by January 18, 2026.
Do parking and regulatory signs have to be MUTCD-compliant?
Yes, especially if they are installed on roads open to public travel.
Are there any exceptions to the MUTCD?
Private roads closed to public access may be exempt, but any site open to public traffic must comply.
